The marked price is one price.
Suitable for installation of flashlight headuse
parameter:Square hole
It is suitable for installation in the LED head of XHP70 package.
The positioning piece is directly stuck on the four corners of the LED.
It is suitable for a light cup with a 10mm diameter at the bottom opening. If it is a 9mm opening, you can use a utility knife or the like to make it larger.
Insulation sheet characteristics: Featured importsMaterial, high temperature resistance, measured heating120-150No deformation, no shrinkage, high strength, good elasticity, smooth and beautiful surface.
Insulation sheet function:
1, Insulation to ensureCREE LEDInsulation between and aluminum lamp cup or aluminum lamp cup, can be pressed tightly in the lamp cupledTime, it acts as an insulation to prevent the lamp cup andCREE LEDShort circuit caused by contact between conductive electrodes on both sides of the aluminum substrate(The solder joint of the lamp bead must be lower than the height of the insulating positioning piece).
2, Positioning function, high dimensional accuracy, so that the standard light cup quickly snaps to the focus position of the lamp bead, and the aperture is perfect, which greatly reduces the time for adjusting the focus of the light cup and greatly improves work efficiency.
3, Fixing function, the light cup is stuck into the insulating positioning sheet, which can not only fix the lamp bead firmly on the lamp holder, increase the thermal conductivity; but also fix the light cup, no matter how bumpy the light cup is, it will not shift randomly and prevent the lamp from being scratched. Bead sphere and short circuit.
4, Protection, when rotating the lamp cap, or tightening the lamp cap, due to the high smoothness of the insulating sheet, the surface is smooth, preventing the lamp cup fromledScratch of aluminum substrate.
5, Decoration function, make the surface of the whole lamp holder smooth and beautiful.